Connect-tech CTIM-00054 Manual de usuario descargar pdf (Pagina 5)

PCI/104-Express to PCI Express Adapter

5 www.connecttech.com CTIM-00054 (0.01) 3/26/2010

800-426-8979 | 519-836-1291

2. Hardware Installation

PC104 Stand-Offs

When installing the ADG017 or ADG20 device into your PCI/104-Express SBC system, four proper stack

heights (0.6”) PC/104 standoffs must be used. If standoffs are not used, there is high likelihood that the

PCI/104-Express connector can be damaged.

Support Bracket Installation

All of the ADG017 and ADG020 products ship with a Standard Height PCI Express Custom Support Bracket

that can be optionally installed to provide greater stability to the PCI Express device installed into your

PCI/104-Express stack. Below are some instructions on how to properly install the bracket.

STEP #1

Insert bracket into alignment holes

STEP #2

Install and tighten each of the 4 supplied nuts.

1 2 3 4 5 6 7 8 9 10

Sin comentarios

Connect-tech CTIM-00054 Manual de usuario Pagina 5