Connect Tech PCIe/104 Manual descargar pdf (Pagina 5)

Introduction

CAN-IB130/230/PCIe104 Manual, V1.0

1 Introduction

1.1 Overview

The IXXAT CAN-IB130/PCIe104 or CAN-IB230/PCIe104 are high-quality elec-

tronic components developed and manufactured according to the latest tech-

nological standards. This manual describes both, the CAN-IB130/PCIe104 in-

terface board (passive) and the CAN-IB230/PCIe104 interface board (active).

In the following both interfaces will be called "CAN interface board".

1.2 Features

 PCIe/104 interface according to the PCI/104 Express

and PCIe/104

 Coupling according to the PCI Express Base Specification, Revision 1.1

specification V2.01

 Up to four independent CAN channels

 ISO 11898-2 CAN bus coupling (high speed)

 Optionally galvanic decoupled

 Optionally CAN low speed according to ISO 11898-3 on channel 1

 Optionally LIN (only CAN-IB230/PCIe104) on channel 2

2 Installation

2.1 Software installation

A driver is needed for the operation of the CAN interface board. This driver is a

component of the VCI (Virtual CAN Interface) V3 for Windows, which you can

download free of charge from http://www.ixxat.com. Please follow the VCI

installation manual to install the VCI V3 CAN driver under Windows. For many

interfaces, IXXAT also offers ECI drivers for Linux and real-time operating

systems. You can find information about the operating systems and interfaces

supported at http://www.ixxat.com.

2.2 Hardware installation

You should install the software driver before inserting the CAN interface board

into the PCIe slot (see previous section). Proper ESD precautions must be

practiced before performing the following tasks in sequence:

1 2 3 4 5 6 7 8 9 10

Sin comentarios

Connect Tech PCIe/104 Manual Pagina 5