Connect Tech Blue Heat/Net Manual de usuario descargar pdf (Pagina 88)

Connect Tech Blue Heat/Net User Manual

88 Revision 0.17

Basic “3 wire” RS-232 null modem connection:

This is used to connect to DTE type devices.

The Blue Heat/Net is a DTE type device.

Used when Hardware RTS->CTS flow control is not required.

This cable is also called a cross over cable.

Connecting to DCE type devices:

DCE type devices do not require a Null Modem cable, they require a straight through cable.

Straight through cables, both DB-9 to DB-9 and DB-9 to DB-25 are commonly available.

The following is an example of a DB-9 Female cable to a DB-25 Male cable to connect to a

modem.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 107 108

Blue Heat/Net 1
Customer Support Overview 3
Contact Information 3
Certification Statements 4
Table of Contents 5
Introduction 9
Features 9
Hardware Installation 11
Connecting Serial Devices 13
Loopback Connectors: 15
Connecting Power 16
Power On Diagnostics: 18
Mounting Bracket 21
Network Connection 22
Direct Connect 22
with the 23
UL Compliance 24
Blue Heat/Net Configuration 24
Description 25
Access to CDS Parameters 25
Getting Access to the SCM 26
SCM Command Reference 26
Command Details 27
Getting Access to TCM 34
TCM Command Reference 35
Testing Raw TCP Server Mode 46
Configure Security Settings 48
Configure Firmware 50
Restore Defaults 51
Saving To Flash 52
Monitor Serial Port Traffic 53
Monitor Network Traffic 53
Monitor TCP/IP Statistics 54
My Blue Heat/Net 55
Field Server Protocols 56
BACnet IP Configuration 57
Ethernet/IP Configuration 57
Modbus TCP Configuration 58
DF1 Configuration 58
DNP3 Configuration 59
Modbus RTU Configuration 59
Modbus ASCII configuration 60
Disabling protocols 61
Protocol Map 61
Protocol Mapping File 61
64 Revision 0.17 64
Device Installation 67
Add New Blue Heat/Net 68
Auto Discover Blue Heat/Net 68
Port Mapping 70
Blue Heat/Net Port: 72
Local COM Port: 73
Friendly Name: 73
Advanced 74
Unmap Port(s): 75
Remapping Ports 76
Port Properties 77
Advanced Settings 78
Baud Rate Mapping 79
Removing your Blue Heat/Net: 81
Blue Heat/Net Properties: 81
Driver Removal 81
_X.XX.gz 83
Appendix 84
Blue Heat/Net Specifications 84
Pinouts 87
Cabling Examples: 87
RS-422/485 Examples: 89
Default Settings 92
Common Configuration Setups 93
DHCP Setup 94
DIN Rail Mounting Option: 95
Bootup Sequence 98
RS-232 Line Interface: 100
RS-485 Line Interface: 100
UL Compliance: 106

Comentarios a estos manuales

Sin comentarios

Connect Tech Blue Heat/Net Manual de usuario Pagina 88

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Connect Tech Blue Heat/Net