Connect Tech JB2 Manual de usuario descargar pdf (Pagina 11)

Xtreme/104 Opto User’s Manual, Connect Tech Inc.

11 Revision 0.05

Mode 1 (one IRQ):

1. Ensure there are no jumpers across positions E and D on the JB3 jumper block.

2. All ports interrupt on one IRQ by setting jumpers on the A or C rows and the middle

rows of jumper blocks JB1 or JB2.

Mode 2 (two IRQs):

1. Jumper position D on the JB3 jumper block.

2. The odd ports (ports 1, 3) interrupt on one IRQ by setting jumpers on the B or D rows

and the middle rows of jumper blocks JB1 or JB2.

3. The even ports (ports 2, 4) interrupt on one IRQ by setting jumpers on the A or C rows

and the middle rows of jumper blocks JB1 or JB2.

Mode 3 (two IRQs – Xtreme/104 Opto, 4 port model only):

1. Jumper position E on the JB3 jumper block.

2. The first two ports (ports 1, 2) interrupt on one IRQ by setting jumpers on the A or C

rows and the middle rows of jumper blocks JB1 and JB2.

3. The last two ports (ports 3, 4) interrupt on one IRQ by setting jumpers on the B or D

rows and the middle rows of jumper blocks JB1 and JB2.

Mode 4 (four IRQs – Xtreme/104 Opto, 4 port model only):

1. Jumper positions D and E on the JB3 jumper block.

2. To set an IRQ for Port 1 install a jumper across a pair of pins on A row and the middle

row of IRQ block JB1.

3. To set an IRQ for Port 2 install a jumper across a pair of pins on B row and the middle

row of IRQ block JB1.

4. To set an IRQ for Port 3 install a jumper across a pair of pins on C row and the middle

row of IRQ block JB2.

5. To set an IRQ for Port 4 install a jumper across a pair of pins on D row and the middle

row of IRQ block JB2.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 22 23

Sin comentarios

Connect Tech JB2 Manual de usuario Pagina 11