Connect Tech NT960/PCI Manual de usuario descargar pdf (Pagina 58)

4-6 Chapter 4: Appendix B - Connector Pinouts

Intellicon-NT960/PCI User's Manual, ver. 0.02

ACM/Flex16 Pinouts

The ACM/Flex16 provides male DB-9 connectors for each port.

For the DB-9 pinout information please refer to Table 4.

Table 4: DB-9 pinouts - ACM/Flex16

Pin No. RS-232

Signal

Direction

RS-485

Signal

Direction

20mA

Signal

Direction

1 DCD input RxD + input RxD - input

2 RxD input TxD + output TxD + output

3 TxD output TxD - output unused

4 DTR output RxD - input unused

5 SG signal gnd. SG signal gnd. unused

6 DSR input CTS - input unused

7 RTS output RTS - output TxD - output

8 CTS input RTS + output RxD + input

9 RI input CTS + input unused

Male DB-9 Connecto

Note: ports 3, 4, 7, 8, 11, 12, and 15 do not support the RI signal.

Technical Tip:

Please ensure that you terminate the DCD or CTS signals if your

application does not use them. The common way to do this is to

connect DCD to DTR and/or to connect CTS to RTS. Failure to

do so may result in a loss of a performance on your Intellicon-

NT960/PCI subsystem.

ACM/Flex16 SLIM Pinouts

You may order the ACM/Flex16 external module with RS-232,

RS-485/422 and/or 20mA Current Loop Serial Line Interface

Modules (SLIM). Please refer to Table 5 for the pinouts for the

SLIM sockets found on the ACM/Flex16 module.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 87 88

Sin comentarios

Connect Tech NT960/PCI Manual de usuario Pagina 58